How to: Arm and Disarm SkyControl 3.7
Arming and disarming are two of the most basic everyday actions that you will perform on your Vivint SkyControl To arm the system, tap and hold the house on the home screen. You will have two options: Û÷StayingÛª or Û÷LeavingÛª If you are arming the system and you plan on staying in the home, slide to Û÷Staying.Ûª Your interior sensors such as motion detectors will remain unarmed so that you can move around the home freely. However, if any perimeter sensors such as doors or windows are opened, the alarm with be triggered. If you are arming the system to leave the home, slide to Û÷Leaving.Ûª The system will start a countdown to give you time to exit the home without triggering an alarm. The default exit delay is 60 seconds. Once you leave, all sensors in the home will be armed. When you are ready to disarm the system, tap the house on the home screen and slide it down to Û÷DisarmÛª You will be prompted to enter your four-digit PIN to disarm the system If your home was armed to Û÷LeavingÛª the system will start a countdown when you enter the home to give you time to disarm the system. The default entry delay is also 60 seconds For more information, visit support.vivint.com